safesite ? series led area light class 1, div. 2 version mechanical information fixture weight: 10lb (4.5 kg) shipping weight: 12lb (5.44 kg) mounting: (1) threaded 3/4 npt rear cabling: 10' (3.5m) soow power cord electrical specifications operating voltage: see table power consumption: 43w / 55w / 70w operating temp: -40 f to +149 f (-40 c to +65 c) noise requirements/ emc: fcc title 47, subpart b, section 15, class a device. rf immunity; 10v/m, 80mhz-1ghz surge protection: 1 kv line to line 2 kv line to ground thd: <15% power factor: > 0.9 construction housing: powder coated aluminum finish: polyester / epoxy powder coat gray ral 7040 for superior corrosion resistance lens: polycarbonate - ul1598a wet location photometric information cri: > 70 cct: 5,700k (cool white) 4,300k (neutral white) optics: 180 f o r ward throw 360 circular pattern ies files: available upon request all values typical unless otherwise state certifications ? class i, div 2, groups a,b,c,d ? ul 844 ? ul 1598/a ? csa 22.2 no. 137-m1981 ? ip66 (pending) ? nema 4x (pending) features & benefits ? 5 year full performance warranty ? instant on/off operation ? universal input (100-277 vac), 50/60hz ? superior color rendition index compared to hps, lps, mv ? mercury free ? resistant to shock and vibration ? temperature compensation technology for longer life ? l70 rated for >100,000 hours @ 25c ? factory sealed ? low t rating compared to traditional fixtures application: the safesite ? series led area light represents the future of energy efficient facility illumination for hazardous locations worldwide. the class i, div 2 led area lighting fixture consumes at least 50% energy compared to traditional hid light sources, while reducing maintenance and carbon emissions. this light incorporates both cutting edge led technology along with proprietary optics to achieve area lighting comparable with other traditional light sources. whether your application is in a refinery, oil platform, chemical plant or any other class i, div 2 application, this fixture offers improved performance across the board. www.dialight.com ordering codes: 10.6 [270] 9.7 [245] 6.0 [152] 6.6 [169] ?.213 [5,41] 4 places 3/4 npt rear entrance 2.0 [51] dimensions in inches [mm] patent pending temperature ratings ambient temperature range t4a temperature code ambient temperature range t5 temperature code -40f to +149f (-40c to +65c) -40f to +113f (-40c to +45c) 1 180 optical pattern versions are optimized for a 45 mounting angle 2 part numbers listed in the above table are cool white. for neutral white version replace the 5th character with n ex: hzd2c 2n becomes hzd2n 2n part number optical pattern 1 color 2 lumens watts lumens per watt replaces up to 100-277vac hzd2c2n 180 cool white 3,500 43 81 70w hid hzd3c2n 360 cool white 3,500 43 81 70w hid hzd4c2n 180 cool white 4,500 55 82 175w hid HZD5C2N 360 cool white 4,500 55 82 175w hid hzd8c2n 180 cool white 5,800 70 83 250w hid hzd9c2n 360 cool white 5,800 70 83 250w hid 347-480vac hzd2c9n 180 cool white 3,500 43 81 70w hid hzd3c9n 360 cool white 3,500 43 81 70w hid hzd4c9n 180 cool white 4,500 55 82 175w hid hzd5c9n 360 cool white 4,500 55 82 175w hid hzd8c9n 180 cool white 5,800 70 83 250w hid hzd9c9n 360 cool white 5,800 70 83 250w hid
www.dialight.com mdtfhzdalx001_f dialight reserves the right to make changes at any time in order to supply the best product possible. the most current version of this document will always be available at: www.dialight.com/assets/brochures_and_catalogs/illumination/mdtfhzdalx001.pdf dimensions in inches [mm] swing bracket with stanchion mount conduit mount swing bracket swing bracket dimensions safesite ? led area light mounting options candela plots 180 optical pattern mounted at 45 360 optical pattern hzxw2 a standard duty aluminum bracket, .25" thick 6061-t6 and powder coated. hzxw4 a standard duty aluminum bracket, .25" thick 6061-t6 and powder coated. this bracket will mount to 1.5" conduit and comes with pipe mount clamps. dimensions in inches [mm] 5.00 (127) 4.50 (114,3) 2.31 (58,7) 1.155 (29,34) .53 (13,5) .42 (10,8) 1.38 (35,05) 3.00 (76,2) r.88 (22,2) 2.250 (57,15) 2.250 (57,15) 2.50 (63,5) 90 ?.265 (6,73) ?1.25 (31,75) ?.335 (8,51) 4 places ?.266 (6,76) drill and tap m8 x 1.25 2 places both sides 7.70 (195,6) r.25 (6,4) typ .25.01 (6,40.2) .25.01 (6,40.2) .88 (22,21) .50 (12,7) 2.25 (57,2) .5 (12,7) r.75 (19,1) 7.3 (184) r.25 (6,4) .85 (21.6) ?.50 (12,7) ?.261 (6,63) 2.0 (50.8) r.38 (9,5) 90 .256 (6,51) 2.25 (57,15) .619 (15,72) 2.26 (6,51) .619 (15,72) .75 (19,11) ?1.5 (38,1) ?.344 (8,74) 1.13 (28.6) ?.52 (13,31) 5.00 (127) 2.31 (58,7) 1.155 (29,34) .53 (13,5) .42 (10,8) 1.38 (35,05) 3.00 (76,2) r.88 (22,2) 2.250 (57,15) 2.250 (57,15) 2.50 (63,5) 90 ?.265 (6,73) ?1.25 (31,75) ?.335 (8,51) 4 places ?.266 (6,76) drill and tap m8 x 1.25 2 places both sides 7.70 (195,6) r.25 (6,4) typ .25.01 (6,40.2) .25.01 (6,40.2) .875 (22,23) .50 (12,7) 2.25 (57,2) .5 (12,7) r.75 (19,1) 7.3 (184) r.25 (6,4) .85 (21.6) ?.50 (12,7) ?.261 (6,63) 2.0 (50.8) r.38 (9,5) 90 .256 (6,51) 2.25 (57,15) .619 (15,72) 2.26 (6,51) .619 (15,72) .75 (19,11) ?1.5 (38,1) ?.344 (8,74) ?.52 (13,31) 1.5 (38,1) .5 (12,7) 1.13 (28.6)
|
